A.Six ground stations
B.Three ground stations
C.Four ground stations
D.Five ground stations
Explanation: The correct answer is Five ground stations.
Submitted by: Academy of Pakistan
Civil Engineering MCQs: 3,057 practice questions with answer choices and available explanations. Page 129 of 204.
Civil Engineering MCQs by topic
Surveying100Structural Analysis53Fluid Mechanics98Highway Engineering129Environmental Engineering146
Now you can submit the latest Civil Engineering MCQs MCQs from your test! SUBMIT HERE
Civil Engineering MCQs
Showing page 129 of 204 · 3,057 total solved questions available.
⚡Start Quiz Mode to Practice Like the Real Exam!
A.increase in viscosity of liquid
B.decrease in viscosity of gas
C.decrease in viscosity of liquid
D.A. and D. above
E.increase in viscosity of gas
Explanation: The correct answer is decrease in viscosity of liquid.
Submitted by: Academy of Pakistan
A.In freshly produced sewage
B.None of these
C.At sewer pipes
D.In sewer treatment plants
Explanation: The correct answer is In freshly produced sewage.
Submitted by: Academy of Pakistan
A.The horizontal component acts through the center of pressure for the vertical projection
B.The vertical component of the hydrostatic force on any surface is equal to the weight of the volume of the liquid above the area
C.he vertical component passes through the center of pressure of the volume
D.The horizontal component of the hydro-static force on any surface is equal to the normal force on the vertical projection of the surface
E.Center of pressure acts at a greater depth than center of gravity
Explanation: The correct answer is he vertical component passes through the center of pressure of the volume.
Submitted by: Academy of Pakistan
A.all of the above
B.to resist tensile stresses
C.to provide adequate bond stress
D.to impart initial compressive stress in concrete
Explanation: The correct answer is to impart initial compressive stress in concrete.
Submitted by: Academy of Pakistan
A.2 and 5
B.2 and V6
C.none of the above
D.3 and 1 kg
E.V5andV5
Explanation: The correct answer is V5andV5.
Submitted by: Academy of Pakistan
A.there is a horizontal tie at the feet of rafters only
B.there are two horizontal ties, one at the feet and other at the middle of the rafters
C.there is a horizontal tie at almost the middle of rafters only
D.there is no horizontal tie beam
Explanation: The correct answer is there is a horizontal tie at almost the middle of rafters only.
Submitted by: Academy of Pakistan
A.CaS04 and H20
B.C02 and calcium
C.H2S and C02
D.Lime and H20
Explanation: The correct answer is CaS04 and H20.
Submitted by: Academy of Pakistan
A.(1) and(4)
B.(2) and (4)
C.(2) and (3)
D.(1) and (3)
Explanation: The correct answer is (1) and(4).
Submitted by: Academy of Pakistan
The algebraic sum of moments of the forces forming couple about any point in their plane is________?
0A.none of the above
B.equal to the moment of the couple
C.constant
D.both of above are correct
E.both of above are wrong
Explanation: The correct answer is equal to the moment of the couple.
Submitted by: Academy of Pakistan
A.forces of tension and compression change but lever arm remains unchanged
B.both forces of tension and compres-sion as well as lever arm remain unchanged
C.forces of tension and compressions remain unchanged but lever arm changes with the moment
D.both forces of tension and compres-sion as well as lever arm change
Explanation: The correct answer is forces of tension and compressions remain unchanged but lever arm changes with the moment.
Submitted by: Academy of Pakistan
A.Fully in excavation
B.Fully in embankment
C.All the above
D.Partly in excavation and partly in embankment
Explanation: The correct answer is Partly in excavation and partly in embankment.
Submitted by: Academy of Pakistan
A.(1), (2) and (3)
B.(1), (2) and (4)
C.Only (2)
D.(1), (2), (3) and (4)
Explanation: The correct answer is Only (2).
Submitted by: Academy of Pakistan
A.comparing two identical equipments
B.comparing similarity between design and actual equipment
C.performing acceptance tests
D.hydraulic designs
E.designing models so that the result can be converted to prototypes
Explanation: The correct answer is designing models so that the result can be converted to prototypes.
Submitted by: Academy of Pakistan
A.dyne
B.watt
C.kilogram
D.newton
E.joule
Explanation: The correct answer is newton.
Submitted by: Academy of Pakistan