A.8 cm
B.6 m
C.10 m
D.8 m
Explanation: The correct answer is 8 m.
Submitted by: Academy of Pakistan
Civil Engineering MCQs: 3,057 practice questions with answer choices and available explanations. Page 201 of 204.
Civil Engineering MCQs by topic
Surveying100Structural Analysis53Fluid Mechanics98Highway Engineering129Environmental Engineering146
Now you can submit the latest Civil Engineering MCQs MCQs from your test! SUBMIT HERE
Civil Engineering MCQs
Showing page 201 of 204 · 3,057 total solved questions available.
⚡Start Quiz Mode to Practice Like the Real Exam!
A.length and diameter are same in two systems
B.length of pipe and discharge are same in two systems
C.head loss and discharge are same in two systems
D.friction factor and length are same in two systems
Explanation: The correct answer is head loss and discharge are same in two systems.
Submitted by: Academy of Pakistan
A.The inclination of axis satellite is 55°
B.The satellite transmits two L band signals (L1 with 1575.42 MHz and L2 with 1276.6 MHz)
C.The nominal altitude is about 20,200 km
D.All of these
Explanation: The correct answer is All of these.
Submitted by: Academy of Pakistan
A.None of these
B.Partially separate system
C.Separate system
D.Combined system
Explanation: The correct answer is Separate system.
Submitted by: Academy of Pakistan
A.30
B.58
C.40
D.18
Explanation: The correct answer is 40.
Submitted by: Academy of Pakistan
A.(i), (ii) and (iii)
B.(i)and(ii)
C.only (i)
D.(ii) and (iii)
Explanation: The correct answer is (i)and(ii).
Submitted by: Academy of Pakistan
A.increase in tensile strength but decrease in ductility
B.increase in both tensile strength and ductility
C.decrease in both tensile strength and ductility
D.decrease in tensile strength but increase in ductility
Explanation: The correct answer is increase in tensile strength but decrease in ductility.
Submitted by: Academy of Pakistan
A.hood
B.tail
C.propelling jacks
D.liner plate
Explanation: The correct answer is liner plate.
Submitted by: Academy of Pakistan
A.decreases pH value of water
B.does not require alkalinity in water for flocculation
C.does not affect pH value of water
D.increases pH value of water
Explanation: The correct answer is decreases pH value of water.
Submitted by: Academy of Pakistan
A.1/2
B.2
C.3
D.3/2
Explanation: The correct answer is 3/2.
Submitted by: Academy of Pakistan
The spacing of transverse reinforcement of column is decided by the following consideration________?
0A.Sixteen times the diameter of the smallest longitudinal reinforcing rods in the column
B.All the above
C.The least lateral dimension of the column
D.Forty-eight times the diameter of transverse reinforcement
Explanation: The correct answer is All the above.
Submitted by: Academy of Pakistan
A.1065 mm
B.1075 mm
C.1045 mm
D.1095 mm
Explanation: The correct answer is 1095 mm.
Submitted by: Academy of Pakistan
A.10 mg/litre
B.1000 mg/litre
C.1 mg/litre
D.100 mg/litre
Explanation: The correct answer is 10 mg/litre.
Submitted by: Academy of Pakistan
A.ratio of inertial force to force due to surface tension
B.ratio of inertial force to force due to viscosity
C.ratio of inertial force to force due to gravitation
D.all the four ratios of inertial force to force due to viscosity, gravitation, surface tension, and elasticity
Explanation: The correct answer is all the four ratios of inertial force to force due to viscosity, gravitation, surface tension, and elasticity.
Submitted by: Academy of Pakistan
A.m = m1 + m2
B.m = m + m + 3
C.m = m1 + m2 + 2
D.m = m1 + m2 + 1
Explanation: The correct answer is m = m + m + 3.
Submitted by: Academy of Pakistan