A.wall joint
B.cross joint
C.bonded joint
D.bed joint
Explanation: The correct answer is cross joint.
Submitted by: Academy of Pakistan
Civil Engineering MCQs: 3,057 practice questions with answer choices and available explanations. Page 40 of 204.
Civil Engineering MCQs by topic
Surveying100Structural Analysis53Fluid Mechanics98Highway Engineering129Environmental Engineering146
Now you can submit the latest Civil Engineering MCQs MCQs from your test! SUBMIT HERE
Civil Engineering MCQs
Showing page 40 of 204 · 3,057 total solved questions available.
⚡Start Quiz Mode to Practice Like the Real Exam!
A.12 cm to 15 cm
B.5 cm to 8 cm
C.8 cm to 10 cm
D.3 cm to 5 cm
Explanation: The correct answer is 5 cm to 8 cm.
Submitted by: Academy of Pakistan
A.one brick thick
B.two bricks thick
C.half brick thick
D.one and a half bricks thick
Explanation: The correct answer is one and a half bricks thick.
Submitted by: Academy of Pakistan
A.A wire wound in spiral form, is called a helical spring
B.The pitch of a close coil spring, is very small
C.All the above
D.The angle made by the coil with horizontal, is called the angle of helix
Explanation: The correct answer is All the above.
Submitted by: Academy of Pakistan
A.positive and negative couples can be balanced
B.if a system of coplanar forces is in equilibrium, then their algebraic sum is zero
C.the algebraic sum of the moments of any two forces about any point is equal to moment of theiwesultant about the same point
D.none of the above
E.if a system of coplanar forces is in equilibrium, then the algebraic sum of their moments about any point in their plane is zero
Explanation: The correct answer is if a system of coplanar forces is in equilibrium, then the algebraic sum of their moments about any point in their plane is zero.
Submitted by: Academy of Pakistan
A.only (i)
B.(i), (ii) and (iv)
C.(i) and (ii)
D.(i), (ii) and (iii)
Explanation: The correct answer is (i), (ii) and (iii).
Submitted by: Academy of Pakistan
A.1.5 m
B.0.5 m
C.1.0 m
D.0.75 m
Explanation: The correct answer is 0.75 m.
Submitted by: Academy of Pakistan
A.load stress + warping stress
B.load stress + frictional stress
C.load stress + warping stress frictional stress
Explanation: The correct answer is load stress + warping stress.
Submitted by: Academy of Pakistan
A.Especially suited to pressure pipes
B.Highly impervious
C.Hydraulically efficient because of their smooth interior surface
D.Highly resistant to sulphide corrosion
Explanation: The correct answer is Especially suited to pressure pipes.
Submitted by: Academy of Pakistan
A.10 years
B.9 years
C.7 eyars
D.8 years
Explanation: The correct answer is 9 years.
Submitted by: Academy of Pakistan
A.0.40 m/sec
B.0.30 m/sec
C.0.35 m/sec
D.0.45 m/sec
Explanation: The correct answer is 0.45 m/sec.
Submitted by: Academy of Pakistan
A.6.28 m/sec
B.3.14 m/sec
C.1.00 m/sec
D.1.57 m/sec
Explanation: The correct answer is 3.14 m/sec.
Submitted by: Academy of Pakistan
A.30 litres/person/year
B.25 litres/person/month
C.30 litres/person/month
D.25 litres/person/year
Explanation: The correct answer is 30 litres/person/year.
Submitted by: Academy of Pakistan
A.boarder flooding
B.furrow flooding
C.check flooding
D.free flooding
Explanation: The correct answer is boarder flooding.
Submitted by: Academy of Pakistan
A.25.8 %
B.24.7 %
C.23.5 %
D.25.0 %
Explanation: The correct answer is 25.0 %.
Submitted by: Academy of Pakistan