A.one cantilever
B.three cantilevers
C.two cantilevers
D.four cantilevers
Explanation: The correct answer is three cantilevers.
Submitted by: Academy of Pakistan
Civil Engineering MCQs: 3,057 practice questions with answer choices and available explanations. Page 61 of 204.
Civil Engineering MCQs by topic
Surveying100Structural Analysis53Fluid Mechanics98Highway Engineering129Environmental Engineering146
Now you can submit the latest Civil Engineering MCQs MCQs from your test! SUBMIT HERE
Civil Engineering MCQs
Showing page 61 of 204 · 3,057 total solved questions available.
⚡Start Quiz Mode to Practice Like the Real Exam!
A.Electrically
B.Mechanically
C.Hydraulically
D.Manually
Explanation: The correct answer is Manually.
Submitted by: Academy of Pakistan
A.64m
B.80m
C.zero
D.60m
Explanation: The correct answer is 60m.
Submitted by: Academy of Pakistan
A.less than or equal to earliest event time of the following node
B.greater than earliest event time of the following node
C.greater than or equal to earliest event time of the following node
D.less than earliest event time of the following node
Explanation: The correct answer is less than or equal to earliest event time of the following node.
Submitted by: Academy of Pakistan
A.All of these
B.The degree of polarisation is a characteristic of the object which helps in the identification of the object
C.A graphical representation of spectral reflectance verses the various growth stages of a crop, depicts a phonologic pattern
D.The changes in the polarisation of the radiation reflected or emitted by an object, is known as polarisation variation
Explanation: The correct answer is All of these.
Submitted by: Academy of Pakistan
A.1/20th of span
B.1/30th of span
C.1/25th of span
D.1/15th of span
Explanation: The correct answer is 1/30th of span.
Submitted by: Academy of Pakistan
A.cubic metre
B.metre/sec
C.square metre
D.cubic metre/sec
Explanation: The correct answer is cubic metre/sec.
Submitted by: Academy of Pakistan
A.always less than flangeway clearance
B.sometimes greater than flangeway clearance
C.equal to flangeway clearance
D.always greater than flangeway clearance
Explanation: The correct answer is always greater than flangeway clearance.
Submitted by: Academy of Pakistan
A.6 hours
B.30 minutes
C.10 hours
D.1 hour
Explanation: The correct answer is 10 hours.
Submitted by: Academy of Pakistan
A.all are correct
B.both (2) and (3)
C.both (1) and (3)
D.only (1)
Explanation: The correct answer is both (2) and (3).
Submitted by: Academy of Pakistan
A.10
B.20
C.15
D.25
Explanation: The correct answer is 20.
Submitted by: Academy of Pakistan
A.(1)and(4)
B.(2) and (3)
C.(1) and (2)
D.(3) and (4)
Explanation: The correct answer is (2) and (3).
Submitted by: Academy of Pakistan
A.decreases
B.increases
C.remains unaffected
D.none of the above
Explanation: The correct answer is increases.
Submitted by: Academy of Pakistan
A.increased by 10% for bars in compression
B.increased by 25% for bars in compression
C.decreased by 25% for bars in compression
D.decreased by 10% for bars in compression
Explanation: The correct answer is increased by 25% for bars in compression.
Submitted by: Academy of Pakistan
A.b = 5 N/mm2 s = 10 N/mm2
B.b = 10 N/mm2 s = 20 N/mm 2
C.b = 6 N/mm2 s = 12 N/mm2
D.b = 8 N/mm2 s = 16 N/mm2
Explanation: The correct answer is b = 10 N/mm2 s = 20 N/mm 2.
Submitted by: Academy of Pakistan