The horizontal angle between the true meridian and magnetic meridian at a place is called________?
0A.declination
B.magnetic bearing
C.local attraction
D.azimuth
Explanation: The correct answer is declination.
Submitted by: Academy of Pakistan
Civil Engineering MCQs: 3,057 practice questions with answer choices and available explanations. Page 64 of 204.
Civil Engineering MCQs by topic
Surveying100Structural Analysis53Fluid Mechanics98Highway Engineering129Environmental Engineering146
Now you can submit the latest Civil Engineering MCQs MCQs from your test! SUBMIT HERE
Civil Engineering MCQs
Showing page 64 of 204 · 3,057 total solved questions available.
⚡Start Quiz Mode to Practice Like the Real Exam!
A.viscosity in increasing order from RC-2 to SC-2
B.viscosity in decreasing order from RC-2 to SC-2
C.none of the above
D.same viscosity
Explanation: The correct answer is same viscosity.
Submitted by: Academy of Pakistan
A.n
B.d + n/3
C.d
Explanation: The correct answer is d + n/3.
Submitted by: Academy of Pakistan
A.7.5 m
B.8.5m
C.5.5m
D.6.5 m
Explanation: The correct answer is 7.5 m.
Submitted by: Academy of Pakistan
A.greater than 1 m
B.less than 300 mm
C.between 300 mm and 750 mm
D.between 750 mm and 1 m
Explanation: The correct answer is between 300 mm and 750 mm.
Submitted by: Academy of Pakistan
A.perpendicular distance between intra-dos and extrados
B.perpendicular distance between springing line and extrados
C.vertical distance between springing line and intrados
D.none of the above
Explanation: The correct answer is perpendicular distance between intra-dos and extrados.
Submitted by: Academy of Pakistan
A.450 mm x 600 mm
B.300 mm x 450 mm
C.600 mm x 750 mm
D.750 mm x 900 mm
Explanation: The correct answer is 600 mm x 750 mm.
Submitted by: Academy of Pakistan
A.time-mean speed
B.spot speed
C.average speed
D.space-mean speed
Explanation: The correct answer is spot speed.
Submitted by: Academy of Pakistan
A.Dissolved oxygen in water
B.All the above
C.Hydrology
D.Temperature
Explanation: The correct answer is All the above.
Submitted by: Academy of Pakistan
A.Angle of twist
B.Reciprocal of the length of the shaft
C.Moment of inertia of the shaft section
D.Modulus of rigidity
Explanation: The correct answer is Moment of inertia of the shaft section.
Submitted by: Academy of Pakistan
A.Principal
B.Interest
C.Rate of interest
D.Simple interest
Explanation: The correct answer is Interest.
Submitted by: Academy of Pakistan
A.”2.5 m
B.2.4 m
C.3.0 m
D.4.0 m
E.5.0 m
Explanation: The correct answer is 3.0 m.
Submitted by: Academy of Pakistan
A.1680 mm
B.810 mm
C.1250 mm
D.650 mm
Explanation: The correct answer is 1680 mm.
Submitted by: Academy of Pakistan
A.brick laid with its breadth parallel to the face or direction of wall
B.brick having the same length and depth as the other bricks but half the breadth
C.brick laid with its length parallel to the face or direction of wall
D.brick with half the width at one end and full width at the other
Explanation: The correct answer is brick having the same length and depth as the other bricks but half the breadth.
Submitted by: Academy of Pakistan
A.large area is required for construction
B.none of the above
C.maintenance and operation cost are high
D.BOD removal is very low
Explanation: The correct answer is large area is required for construction.
Submitted by: Academy of Pakistan