A.350
B.180
C.150
D.250
Explanation: The correct answer is 250.
Submitted by: Academy of Pakistan
Civil Engineering MCQs: 3,057 practice questions with answer choices and available explanations. Page 89 of 204.
Civil Engineering MCQs by topic
Surveying100Structural Analysis53Fluid Mechanics98Highway Engineering129Environmental Engineering146
Now you can submit the latest Civil Engineering MCQs MCQs from your test! SUBMIT HERE
Civil Engineering MCQs
Showing page 89 of 204 · 3,057 total solved questions available.
⚡Start Quiz Mode to Practice Like the Real Exam!
A.All the above
B.Bath room and lavatory
C.Kitchen and pantry
D.The walls along with doors and other openings
Explanation: The correct answer is All the above.
Submitted by: Academy of Pakistan
A.0.446 xu
B.0.416 xu
C.0.573 xu
D.0.367 xu
Explanation: The correct answer is 0.416 xu.
Submitted by: Academy of Pakistan
A.(ii) and (iii)
B.(i) and (ii)
C.(i) and (iv)
D.(iii) and (iv)
Explanation: The correct answer is (i) and (ii).
Submitted by: Academy of Pakistan
A.decreases
B.first increases and then decreases after reaching a maximum value at optimum speed
C.first decreases and then increases after reaching a minimum value at optimum speed
D.increases
Explanation: The correct answer is increases.
Submitted by: Academy of Pakistan
A.compressibility, permeability and dry strength increase
B.compressibility and permeability increase and dry strength decreases
C.compressibility and permeability decrease and dry strength increases
D.compressibility, permeability and dry strength decrease
Explanation: The correct answer is compressibility and permeability increase and dry strength decreases.
Submitted by: Academy of Pakistan
A.1.0 m/sec to 1.2 m/sec
B.3.0 m/sec to 3.5 m/sec
C.less than 1.0 m/sec
D.1.5 m/sec to 2.0 m/sec
Explanation: The correct answer is 1.0 m/sec to 1.2 m/sec.
Submitted by: Academy of Pakistan
A.45°
B.30°
C.90°
D.60°
Explanation: The correct answer is 45°.
Submitted by: Academy of Pakistan
A.[(100 + P2)/(100 – P1)] V1
B.[(100 + P1)/(100 – P2)] V1
Explanation: The correct answer is [(100 + P1)/(100 – P2)] V1.
Submitted by: Academy of Pakistan
A.unstable equilibrium
B.stable equilibrium
C.neutral equilibrium
D.all of the above
Explanation: The correct answer is stable equilibrium.
Submitted by: Academy of Pakistan
A.300 mg/l
B.200 mg/l
C.400 mg/l
D.100 mg/l
Explanation: The correct answer is 300 mg/l.
Submitted by: Academy of Pakistan
A.three members with unknown forces of the frame
B.three members with known forces of the frame
C.four members with unknown forces of the frame
D.two members with unknown forces of the frame
E.four members with two known forces
Explanation: The correct answer is three members with unknown forces of the frame.
Submitted by: Academy of Pakistan
A.85%
B.70 to 75%
C.65 to 70%
D.75 to 80%
Explanation: The correct answer is 75 to 80%.
Submitted by: Academy of Pakistan
A.All the above
B.For a uniformly distributed load, B.M. curve is a parabola
C.For a load varying linearly, the shear force curve is a parabola
D.For a uniformly distributed load, the shear force varies linearly
Explanation: The correct answer is All the above.
Submitted by: Academy of Pakistan
A.rougher than the traffic lanes
B.of same colour as that of the pavement
C.of very low load bearing capacity
D.smoother than the traffic lanes
Explanation: The correct answer is rougher than the traffic lanes.
Submitted by: Academy of Pakistan