Hot face insulating linings of high purity alumina fused mullite are used, where________?
Correct answer
C. All A., B. and C.
Explanation
The correct answer is All A., B. and C..
Correct answer
C. All A., B. and C.
Explanation
The correct answer is All A., B. and C..
Joule-Thomson co-efficient depends on the________?
In frictional fluid flow, the quantity, (P/ρ) + (V2/2gc) + gz/gc) is________?
Pure aniline is evaporating through a stagnant air film of 1 mm thickness at 300 K and a total pressure of 100 KPa. The vapor pressure of aniline at 300 K is 0.1 KPa. The total molar concentration under these conditions is 40.1 mole/m3. The diffusivity of aniline in air is 0.74 × 10-5m2/s. The numerical value of mass transfer co-efficient is 7.4 × 10-3. Its units are________?
The following gas phase reaction is taking place in a plug flow reactor. A stoichiometric mixture of A and B at 300 K is fed to the reactor. At 1 m along the length of the reactor, the temperature is 360 K. The pressure drop is negligible and an ideal gas behaviour can be assumed. Identify the correct expression relating the concentration of A at the inlet (CA0), concentration of A at 1m (CA) and the corresponding conversion of A (X)?
As per Kirchoff‟s law, the ratio of the total radiating power to the absorptivity of a body depends on the________?
Find a mechanism that is consistent with the rate equation and reaction given below?