Correct answer
D. All A., B. & C.
Explanation
The correct answer is All A., B. & C..
Water is entering a storage tank at a temperature T0 and flow rate Q0 and leaving at a flow rate Q and temperature T. There are negligible heat losses in the tank. The area of cross-section of the tank is A0. The model that describes the dynamic variation of temperature of water in the tank with time is given as________?
For a cold dilute feed to produce thick viscous liquor, backward feeding as compared to forward feeding results in________?
Polymerisation of poly functional monomers produces polymers having________?
Dehydration of ammonium carbamate (to produce urea) is a/an ________ reaction?
Heat capacity of air can be approximately expressed as, Cp = 26.693 + 7.365 x10-3 T, where, Cp is in J/mole.K and T is in K. The heat given off by 1 mole of air when cooled at atmospheric pressure from 500°C to – 100°C is ________?
To avoid the tearing off the plate of an edge, the margin (i.e., the minimum distance from the centre of the rivet hole to the nearest edge of the plate) should be equal to ________?