1507Civil EngineeringMedium
Drag force is a function of________?
A(1) and (2)
B(2) and (3)
C(1), (2) and (3)
D(1) and (3)
Correct answer
C. (1), (2) and (3)
Explanation
The correct answer is (1), (2) and (3).
Correct answer
C. (1), (2) and (3)
Explanation
The correct answer is (1), (2) and (3).
A first class brick when immersed in cold water for 24 hours should not absorb water more than________?
A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm2. If the slope at the ends is 0.005 radian and the value of E = 0.2 × 106 N/mm2, the depth of the joist, is________?
According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is________?
The effective length of a fillet weld should not be less than________?
For detecting the nitrites in the sewage, the matching colour may be developed by adding________?
section modulus of a square section of side B and that of a circular section of The ratio of the diameter D, is________?