689Civil EngineeringMedium
Bolts are most suitable to carry________?
Ashear
Bshear and bending
Caxial tension
Dbending
Correct answer
C. axial tension
Explanation
The correct answer is axial tension.
Correct answer
C. axial tension
Explanation
The correct answer is axial tension.
The maximum magnitude of shear stress due to shear force F on a rectangular section of area A at the neutral axis, is________?
The runway length after correcting for elevation and temperature is 2845 m. If the effective gradient on runway is 0.5 percent then the revised runway length will be________?
The drainage area of a town is 12 hectares. Its 40% area is hard pavement ( K = 0.85), the 40% area is unpaved streets (K = 0.20) and the remaining is wooded areas (K = 0.15). Assuming the time of concentration for the areas as 30 minutes and using the formula Ps = 900/(t + 60) the maximum run off is________?
For rivets in tension with counter-sunk heads, the tensile value shall be________?
Poisson’s ratio for concrete________?
For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is________?