1816Civil EngineeringMedium
As per IS specifications, the maximum final setting time for ordinary Portland cement should be________?
A6 hours
B30 minutes
C10 hours
D1 hour
Correct answer
C. 10 hours
Explanation
The correct answer is 10 hours.
Correct answer
C. 10 hours
Explanation
The correct answer is 10 hours.
For the design of a simply supported T-beam the ratio of the effective span to the overall depth of the beam is limited to________?
Unit of runoff in M.K.S. system is________?
Instantaneous unit hydrograph is a hydrograph of________?
For initial estimate for a beam design, the width is assumed________?
The depletion allowance method of computing depletion is commonly known as ________?
The type of joint commonly used at the junction of a principal rafter and tie beam in timber trussess is________?