Correct answer
B. 1/7
Explanation
The correct answer is 1/7.
The units of kinematic viscosity are________?
If D is the depth of scour below original bed, then the width of launching apron is generally taken as________?
The initial setting time for ordinary Portland cement as per IS specifications should not be less than________?
A system of copianar forces is in equilibrium when________?
The maximum degree of curvature for Meter Gauge is limited to________?
If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured parallel to the supported edge, the effective width of the slab be is________?